In-Store Sizing and Product Support
Welcome!
So you've scanned our QR code - smart move! This page will walk you through how to size yourself for chastity. Whether you're just curious or ready to lock up, this is the place to start.
The Basics: Your Device Has 3 Parts
Each device consists of three parts:
- The base ring (goes behind the balls, like a cock ring)
- The cage (goes over the shaft)
- The lock (holds everything together)
Step 1: Get Hands On
Start by playing with the cage in your hands and assembling it off-body. This helps you understand how the cage, ring, and lock pieces all work together.
Step 2: Stay Soft
No surprises here. This process works best when you're as soft and relaxed as possible. Take your time, breathe, and don't rush. A calm cucumber is easier to cage.
Pro tip: Wait till you're all locked up to assess whether your cage and ring are too big, too small, or just right.
Step 3: Start with Ring #3
Put on a #3 base ring in the Standard (flat) style first. This is our most popular size and gives you a starting point. Think of it like slipping on a cock ring - ball, ball, penis!
Pro tips:
Start with the Standard ring style. Got smaller balls? Try an XD ring next to prevent escape.
Don't jump straight to the Curved ring style, even if you're curious about it. Try the Standard first. People often jump straight to the Curved and regret it later when their balls slip out too easily!
Step 4: Bring the Cage In
Pick a cage size that is closest to your anatomy. Line up the cage with the base ring and gently bring them together. Watch out for pinches! There's a spot on each side where skin can get caught.
Pro tip: If things feel tricky, pull your scrotum down gently with one hand while sliding the cage on with the other.
Step 5: Lock It Together
Once everything's in place, grab the lock and key and connect it all. If the lock won't go in entirely or feels forced - stop! You may need to use more pressure to bring the cage and ring fully together.
Step 6: Nudge It In
Is your head not sitting all the way at the front? Use a cotton swab to push between the bars and gently guide the penis forward into the cage. The goal is a comfy, full fit.
Fit Check: What to Watch For
Ring Too Big or Small?
- Too big: If you grab the cage by the lock chamber and push it forward, you'll see a lot of space between your shaft and the ring. Try a smaller ring.
- Too small: You'll feel tight, uncomfortable squeezing around the whole package or pressure and rubbing under the scrotum. You might also see bulging. Not ideal. Try a bigger ring.
Cage Too Long or Wide?
- Too long: Your head won't reach the tip of the cage.
- Too wide: You'll notice extra wiggle room. There will be a lot of space between your shaft or head and the cage walls.
Cage Too Short or Narrow?
- Too short: Your head might poke out the front opening, or the whole cage might be pushed forward and hang away from your body.
- Too narrow: You'll see skin bulging out of the holes of the cage.
Pro Tips:
Don't be afraid to try a few combos. Your cage should feel snug, but not tight; supportive, but not restrictive.
Found a size that feels good? Do some squats. Pull up your pants and see how it feels under your clothes. Take a few steps. Make sure the cage feels comfortable when you're moving!
Final Thoughts
Finding your perfect fit is part of the fun. Everyone's built a little differently. Don't feel bad trying a few sizes before you find your Goldilocks setup. Be kind to your bits, take your time, and enjoy the process.
Share With Us
Once you've found your perfect fit and locked up, don't be shy! Snap a pic of your new setup and tag us on:
You can also use the hashtag #TeamLocked.